cisco mini usb console cable driver windows 10 download

YouĬan initially configure the entire stack from any member switch. Switches, connect to the console port of one of the switches in the stack. You lose the Telnet connection after entering theĪccessing the CLI Through the Console PortĬonfigured or unconfigured switch by connecting the RJ-45 console port or USBĬonsole port of the switch to your PC or workstation and accessing the switch Enter the information described inĬonfiguration information for the switch, save it to flash memory by using theĪddress 10.0.0.1 remains active on the switch until you enter theĬommand. Setup mode, open a Telnet session to the switch by entering the IP addressĮXEC command. Follow the stepsĭescribed in the getting started guide for turning on the switch and using

Set the switch in Express Setup mode and connect a switchĮthernet port to an Ethernet port on your PC or workstation. Entering the Initial Configuration Information.Accessing the CLI Through the Console Port.Accessing the CLI Through Express Setup.it should work, now.Configuring the Switch with the CLI-Based Setup Program Also, check the Cisco Serial (COMx) port settings. Check that the driver proider is Cisco and NOT Cypress. Finally, You will see 'USB Serial Port 'change to 'Cisco Serial (x)'. Click Let me pick from a list of avalibale drivers on my computer.ġ2.

Now, click Update Driver and Browse My Comptuter for driver software. This is using the CYpress driver and not correct CIsco driver You must update the driver!ġ1. if you see above, go to Ports (COM & LPT).

if are don't see above, repeat step 1 to 8ġ0. You will see Cisco Bus Enumerator and Cisco USB to Serial Adapter.ĩ. check device manager under CiscoUsbConsoleWindowsDriver. connect the blue cisco usb console cableĨ. launch the device manager to observe the USB driver installationħ. launch setup(圆4).exe file in WIndows_64 folder that was extracted from the file Cisco_usbconsole_driver_3_1.zipĦ. disconnect the blue cisco USB console cableĤ. uninstall (remove) the Cisco USB driver using the setup(圆4).exeģ. If you installed it already and having issues connecting to the com port:ġ.

Cisco mini usb console cable driver windows 10 download